Overview
A traditional clear varnish used to build a durable, high gloss finish for windows, doors, and conservatories. Ideal to enhance the natural beauty and colour of wood Sadolin has developed a varnish that protects against UV damage and provides long-lasting protection that resists peeling and flaking.
- High gloss, clear finish
- UV protection
- Enhances the natural wood grain
- Resists peeling and flaking
| Area | Exterior |
| Recommended Use | Windows, doors and conservatories |
| Base | Alkyd resin |
| Coverage | Up to 13m² per litre |
| Drying Time | Touch Dry 4-6 hours |
| Re-Coat Time | 16-24 hours |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush |
| Clean Up | Clean with a proprietary cleaner immediately after use |
Preparation
Always ensure the surface to be painted is clean, dry and dirt free to ensure adheshion.
- Degrease any exposed bare timber by wiping with a cloth dampened with methylated spirits.
- Sand back any weathered, loose, or grey timber to a clean and sound surface.
- Fill any surface defects, imperfections, or open joints with an appropriate filler such as .
- Only use non-ferrous screws, nails, and fixings.
- Any non-preservative treated softwood timber should be treated with two coats of .
Application
We recommend always following the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.
- Do not apply when temperatures are below 8°C and above 25°C.
- Thoroughly stir prior to use and apply with a good quality, long-haired, soft bristle brush.
- Pay special attention to end grain, tops, and bottoms of the door and under cills for full weather protection.
- Apply 2-3 coats, allowing 16-24 hours between coats, treat bare wood with 3 full coats.
- Protect from frost and rain until dry.
